ZyXEL Communications 662HW Series - Manual (Page 241)

Prestige 662H/HW Series User’s Guide
241 Chapter 19 VPN Screens
19.16 Configuring Global Setting
To change your Prestige’s global settings, click VPN and then Global Setting. The screen
appears as shown.
Figure 102 VPN: Global Setting
The following table describes the fields in this screen.
Table 75
LABEL DESCRIPTION
No This is the security association index number.
Name This field displays the identification name for this VPN policy.
Encapsulation This field displays Tunnel or Transport mode.
IPSec Algorithm This field displays the security protocols used for an SA.
Both AH and ESP increase Prestige processing requirements and communications
latency (delay).
Disconnect Select Disconnect next to a security association and then click Apply to stop that
security association.
Back Click Back to return to the previous screen.
Apply Click Apply to save your changes back to the Prestige.
Refresh Click Refresh to display the current active VPN connection(s).
Table 76 VPN: Global Setting
LABEL DESCRIPTION
Windows Networking
(NetBIOS over TCP/IP)
NetBIOS (Network Basic Input/Output System) are TCP or UDP packets that
enable a computer to find other computers. It may sometimes be necessary to
allow NetBIOS packets to pass through VPN tunnels in order to allow local
computers to find computers on the remote network and vice versa.
Allow NetBIOS Traffic
Through All IP/Sec
Tunnels
Select this check box to send NetBIOS packets through the VPN connection.
Back Click Back to return to the previous screen.