ZyXEL Communications 662HW Series - Manual (Page 402)

Prestige 662H/HW Series User’s Guide
Chapter 40 Firmware and Configuration File Maintenance 402
Figure 243 Backup Configuration Example
4 After a successful backup you will see the following screen. Press any key to return to the
SMT menu.
Figure 244 Successful Backup Confirmation Screen
40.3 Restore Configuration
This section shows you how to restore a previously saved configuration. Note that this
function erases the current configuration before restoring a previous back up configuration;
please do not attempt to restore unless you have a backup configuration file stored on disk.
FTP is the preferred method for restoring your current computer configuration to your Prestige
since FTP is faster. Please note that you must wait for the system to automatically restart after
the file transfer is complete.
40.3.1 Restore Using FTP
For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file
upload in this chapter.
** Backup Configuration completed. OK.
### Hit any key to continue.###
Type a location for storing the
configuration file or click
Browse to look for one.
Then click Receive.
Choose the Xmodem protocol.
Note: Do not interrupt the file transfer process as this may PERMANENTLY
DAMAGE YOUR Prestige.