ZyXEL Communications 662HW Series - Manual (Page 437)

Prestige 662H/HW Series User’s Guide
437 Chapter 45 VPN/IPSec Setup
45.3 IPSec Setup
Select Edit in the Select Command field; type the index number of a rule in the Select Rule
field and press [ENTER] to edit the VPN using the menu shown next.
Secure GW
Addr
This is the WAN IP address or the domain name (up to the first 15 characters are
displayed) of the IPSec router with which you are making the VPN connection. This field
displays 0.0.0.0 when you configure the Secure Gateway Address field in SMT 27.1.1
to 0.0.0.0.
Select
Command
Press [SPACE BAR] to choose from None, Edit, Delete, Go To Rule, Next Page or
Previous Page and then press [ENTER]. You must select a rule in the next field when
you choose the Edit, Delete or Go To commands.
Select None and then press [ENTER] to go to the “Press ENTER to Confirm…” prompt.
Use Edit to create or edit a rule. Use Delete to remove a rule. To edit or delete a rule,
first make sure you are on the correct page. When a VPN rule is deleted, subsequent
rules do not move up in the page list.
Use Go To Rule to view the page where your desired rule is listed.
Select Next Page or Previous Page to view the next or previous page of rules
(respectively).
Select Rule Type the VPN rule index number you wish to edit or delete and then press [ENTER].
When you have completed this menu, press [ENTER] at the prompt “ Press ENTER to Confirm
or ESC to Cancel: ” to save your configuration, or press [ESC] at any time to cancel.
Table 149 Menu 27.1 IPSec Summary (continued)
FIELD DESCRIPTION
Note: You must also configure menu 27.1.1.1 or menu 27.1.1.2 to fully
configure and use a VPN.