ZyXEL Communications 662HW Series - Manual (Page 404)

Prestige 662H/HW Series User’s Guide
Chapter 40 Firmware and Configuration File Maintenance 404
40.3.3 Restore Via Console Port
Restore configuration via console port by following the HyperTerminal procedure shown next.
Procedures using other serial communications programs should be similar.
1 Display menu 24.6 and enter “y” at the following screen.
Figure 247 System Maintenance: Restore Configuration
2 The following screen indicates that the Xmodem download has started.
Figure 248 System Maintenance: Starting Xmodem Download Screen
3 Run the HyperTerminal program by clicking Transfer, then Send File as shown in the
following screen.
Figure 249 Restore Configuration Example
4 After a successful restoration you will see the following screen. Press any key to restart
the Prestige and return to the SMT menu.
Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):
Starting XMODEM download (CRC mode) ...CCCCCCCCC
Type a location for storing the
fi ti fil li k
Choose the Xmodem protocol.
Type the configuration file’s
location, or click Browse to
search for it.
Type a location for storing the
fi ti fil li k
Then click Send.