Sa monitor, 1 sa monitor overview, 2 using sa monitor – ZyXEL Communications 662HW Series User Manual
Page 446: Chapter 46 sa monitor, 1 sa monitor overview 46.2 using sa monitor

Prestige 662H/HW Series User’s Guide
Chapter 46 SA Monitor
446
C
H A P T E R
46
SA Monitor
This chapter teaches you how to manage your SAs by using the SA Monitor in SMT menu 27.2.
46.1 SA Monitor Overview
A Security Association (SA) is the group of security settings related to a specific VPN tunnel.
This menu (shown next) displays active VPN connections.
46.2 Using SA Monitor
Use the Refresh function to display active VPN connections.
Use the Disconnect function to cut off active connections.
Type 2 in Menu 27 - VPN/IPSec Setup, and then press [ENTER] to go to Menu 27.2 - SA
Monitor.
Note: When there is outbound traffic but no inbound traffic, the SA times out
automatically after two minutes. A tunnel with no outbound or inbound traffic
is "idle" and does not timeout until the SA lifetime period expires. See the
Web configurator part on keep alive to have the Prestige renegotiate an
IPSec SA when the SA lifetime expires, even if there is no traffic.