ZyXEL Communications 662HW Series - Manual (Page 158)

Prestige 662H/HW Series User’s Guide
Chapter 14 Firewall Configuration 158
C
H A P T E R
14
Firewall Configuration
This chapter shows you how to enable and configure the Prestige firewall.
14.1 Access Methods
The web configurator is, by far, the most comprehensive firewall configuration tool your
Prestige has to offer. For this reason, it is recommended that you configure your firewall using
the web configurator. SMT screens allow you to activate the firewall. CLI commands provide
limited configuration options and are only recommended for advanced users.
14.2 Firewall Policies Overview
Firewall rules are grouped based on the direction of travel of packets to which they apply:
By default, the Prestige’s stateful packet inspection allows packets traveling in the following
directions:
• LAN to LAN/ Router
This allows computers on the LAN to manage the Prestige and communicate between
networks or subnets connected to the LAN interface.
• LAN to WAN
• LAN to DMZ
• WAN to DMZ
• DMZ to WAN
By default, the Prestige’s stateful packet inspection blocks packets traveling in the following
directions:
• WAN to LAN
• LAN to LAN/ Router • WAN to LAN • DMZ to LAN
• LAN to WAN • WAN to WAN/ Router • DMZ to WAN
• LAN to DMZ • WAN to DMZ • DMZ to DMZ/ Router
Note: The LAN includes both the LAN port and the WLAN.