2 protocol dependent ethernet setup, 3 cp/ip ethernet setup and dhcp – ZyXEL Communications 662HW Series User Manual
Page 313
Prestige 662H/HW Series User’s Guide
313
Chapter 28 Menu 3 LAN Setup
28.2
Protocol Dependent Ethernet Setup
Depending on the protocols for your applications, you need to configure the respective
Ethernet Setup, as outlined below.
• For TCP/IP Ethernet setup refer to
the Internet Access Configuration section
.
• For bridging Ethernet setup refer to
28.3 CP/IP Ethernet Setup and DHCP
Use menu 3.2 to configure your Prestige for TCP/IP.
To edit menu 3.2, enter 3 from the main menu to display Menu 3 — LAN Setup. When menu
3 appears, press 2 and press [ENTER] to display Menu 3.2 — TCP/IP and DHCP Ethernet
Setup, as shown next
:
This manual is related to the following products: