ZyXEL Communications 662HW Series - Manual (Page 185)

Prestige 662H/HW Series User’s Guide
185 Chapter 16 Content Access Control
16.2 Activating CAC and Create User Groups
From the Site Map, click Content Access Control and General to open the configuration
screen.
Use this screen to activate Content Access Control and set up the four user groups.
Figure 76 Content Access Control: General
The following table describes the labels in this screen.
Note: You must set up all four user groups.
Table 54 Content Access Control: General
LABEL DESCRIPTION
Enable
Content
Access
Control
Select the check box to allow the LAN administrator to have control over a LAN user’s
Internet access.
Idle Timeout Type the time in minutes that elapses before the Prestige automatically terminates the
Internet session. The default time is 10 minutes.
Group List These groups are used in conjunction with content filtering to decide which web pages
cannot be accessed by the user. You can set up to four user groups.