ZyXEL Communications 662HW Series - Manual (Page 549)

Prestige 662H/HW Series User’s Guide
549 Appendix S
Rule [%d] phase 2 mismatch The listed rule’s IKE phase 2 did not match between the router
and the peer.
Rule [%d] Phase 2 key length
mismatch The listed rule’s IKE phase 2 key lengths (with the AES
encryption algorithm) did not match between the router and
the peer.
Table 43 802.1X Logs
LOG MESSAGE DESCRIPTION
Local User Database accepts
user. A user was authenticated by the local user database.
Local User Database reports user
credential error. A user was not authenticated by the local user database
because of an incorrect user password.
Local User Database does not
find user`s credential. A user was not authenticated by the local user database
because the user is not listed in the local user database.
RADIUS accepts user. A user was authenticated by the RADIUS Server.
RADIUS rejects user. Pls check
RADIUS Server. A user was not authenticated by the RADIUS Server.
Please check the RADIUS Server.
Local User Database does not
support authentication method. The local user database only supports the EAP-MD5
method. A user tried to use another authentication
method and was not authenticated.
User logout because of session
timeout expired. The router logged out a user whose session expired.
User logout because of user
deassociation. The router logged out a user who ended the session.
User logout because of no
authentication response from
user. The router logged out a user from which there was no
authentication response.
User logout because of idle
timeout expired. The router logged out a user whose idle timeout period
expired.
User logout because of user
request. A user logged out.
Local User Database does not
support authentication method. A user tried to use an authentication method that the local
user database does not support (it only supports EAP-
MD5).
No response from RADIUS. Pls
check RADIUS Server. There is no response message from the RADIUS server,
please check the RADIUS server.
Use Local User Database to
authenticate user. The local user database is operating as the
authentication server.
Use RADIUS to authenticate user. The RADIUS server is operating as the authentication
server.
No Server to authenticate user. There is no authentication server to authenticate a user.
Local User Database does not
find user`s credential. A user was not authenticated by the local user database
because the user is not listed in the local user database.
Table 42 IKE Logs (continued)
LOG MESSAGE DESCRIPTION