Stop the fax/internet fax job, Specifying destinations – Xerox 604P18057 User Manual
Page 81
Specifying Destinations
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
81
Stop the Fax/Internet Fax Job
Follow the steps below to manually cancel an activated fax/Internet Fax job.
1.
Select [Stop] on the touch
screen or press the
button on the control panel to
suspend the fax job while the
document is being scanned.
2.
If required, press the
panel to display the [Job Status]
screen. To exit the [Job Status]
screen, press the
button.
3.
Press the
fax/Internet Fax job still being scanned. To resume the job, select [Start] on the
touch screen or the
NOTE: Once the transmission starts, you can stop the job only by selecting [Stop] on
the touch screen. You cannot resume the canceled job after the transmission starts.
Specifying Destinations
This section describes how to specify destinations using the features available on the
machine. For more information, refer to the following.
Next Recipient – page 82
Address Book – page 82
Speed Dial – page 83
Keyboard – page 83
Relay Broadcast – page 84
Special Characters – page 85
NOTE: You can specify destinations from any tab using the keypad on the control
panel, [Speed Dial], and [Next Recipient].
NOTE: You can also specify a combined destination without pressing the [Next
Recipient] button, using the keypad on the control panel, [Speed Dial], and [Address
Book].