Xerox 604P18057 - Manual (Page 143)

Print Driver Features
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 143
Multiple Up
Prints multiple documents onto one sheet of paper. The machine automatically
reduces/enlarges the images as needed to fit on one page.
Poster
Divides and enlarges a single image and prints it over multiple pages so that you can
join all the pages to make one large poster.
Print Mode
Specifies the resolution value for printing. You can select [Standard] or [High
Resolution].
The higher the resolution selected, the slower will be the speed of printing.
Contrast
Adjusts the rate of change in brightness from white to black for printing. Specify the rate
that ranges from -100 to +100 using the keyboard or slider bar. You can check the
outcome of a changed settings using the picture quality image displayed on the left of
the window.
Watermarks
Makes settings for printing a watermark over a file.
Skip Blank Pages
Does not print blank pages when printing documents that contain blank pages.
Draft Mode
Prints the text and graphic in gray rather than black, thus reducing the amount of toner
used.
Notify Job End by E-mail
Specifies whether you want to be notified by e-mail when your print job is finished.
Specify Job Owner
Selects how the job owner is specified. This job owner is used when print job tabulation
functions are used.
Information on printing from UNIX and Macintosh computers is provided separately.
Refer to the following for procedures on sending print jobs.
• UNIX – System Administration Guide
• Macintosh – PostScript User Guide