Xerox 604P18057 - Manual (Page 332)

16 Problem Solving
332 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
016-732 The form specified in the emulation setting is not registered in the host
computer. Resend the form data.
016-735 An attempt was made to print a job template while it was being updated. Wait a
while, and then instruct it to print again.
016-748 Printing is not possible due to insufficient disk space. Reduce the number of
pages in print data, for example by dividing the print data or printing one copy at
a time when making multiple copies.
016-749 A PJL command syntax error occurred. Check the print settings, or correct the
PJL command.
016-756 The use of the service is restricted. Contact the Key Operator.
016-757 A wrong password was entered. Enter the correct password.
016-758 The account is not authorized for copying. Contact the Key Operator.
016-759 The maximum number of copies has been reached. Contact the Key Operator.
016-760 An error occurred during PostScript processing. Take one of the following
actions.
• Set for optimized speed in the print driver.
• Increase the size of the print page buffer.
• Increase PostScript memory.
016-761 An error occurred during image processing. Set for optimized speed in the print
driver and instruct the machine to print again. If this does not rectify printing, set
for highest compatibility to ensure printing and try again.
016-762 A print language not supported on the machine was specified. Specify the print
language in [Print Mode] under [Port Settings].
016-764 Could not connect to the SMTP server. Contact the System Administrator.
016-765 Could not send e-mail as the disk on the SMTP server was full. Contact the
System Administrator.
016-766 An error occurred on the SMTP server. Contact the System Administrator.
016-767 Could not send e-mail as the e-mail address was wrong. Verify that the e-mail
address is correct, and try sending the e-mail again.
016-768 Could not connect to the SMTP server as the e-mail address of the machine
was incorrect. Check the e-mail address of the machine.
016-769 The SMTP server does not support delivery confirmation (DSN). Send e-mail
without setting confirmation.
016-771
016-772 Could not acquire the scan data repository address by CentreWare Scan
Services. Specify the correct DNS address. Alternatively, set the address of the
scan data repository as an IP address.
016-773 The IP address of the machine is not set correctly. Check the DHCP
environment. Alternatively, manually specify an IP address of the machine.
Code Description and Remedy