Domain filter, Remote authentication server settings – Xerox 604P18057 User Manual
Page 219
Network Settings
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
219
Domain Filter
This feature allows you to restrict incoming e-mails by registering domain names of
senders.
1.
Select [Domain Filter] on the
[Network Settings] screen.
2.
Perform the necessary
operations.
3.
Select [Close].
Domain Filtering
Allows you to select the restriction method, either [Enter Permitted Domain Names] or
[Enter Rejected Domain Name]. If [Off] is selected, this feature is disabled.
Domain 1–50
Allows you to enter domain names to be restricted or permitted according to the
selection on the [Domain Filtering].
Remote Authentication Server Settings
This feature allows you to set up the external authentication server settings.
1.
Select [Remote Authentication
Server Settings] on the [Network
Settings] screen.
2.
Perform the necessary
operations.
3.
Select [Close].
Authentication System
Allows you to select the remote authentication service.
Remote Server Setup
Select the method of specifying the KDC (Key Distribution Center) server.
Remote Server IP Address
Allows you to enter the IP address of the KDC server in the form of vvv.xxx.yyy.zzz.
Remote Server Name
Allows you to enter the KDC server name in the style of FQDN within a maximum of
255 characters.