Xerox 604P18057 - Manual (Page 160)

9 CentreWare Internet Services
160 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Drum Cartridge
Displays the status of the drum cartridge as [Ready], [Type Mismatch], [Replace Soon],
[Replace Now], or [Not Installed].
NOTE: If [Replace Now] is displayed, replace the drum cartridge.
Toner Cartridge
Displays the remaining toner in 25% increments.
NOTE: If the remaining toner becomes low, replace the toner cartridge.
NOTE: Once the new toner cartridge is installed, a status of "Ready" is displayed.
Staple Cartridge
Displays the status of the staple cartridge as [Ready], [Not Available], [Empty], or
[Fault].
NOTE: If [Empty] is displayed, replace with a new staple cartridge.
Properties
This page allows you to view and set the machine properties. These include the
machine details and configuration, the CentreWare Internet Services settings, the port
settings, protocol settings, emulation settings, and the memory settings. The items
displayed will depend on the model and configuration of the machine.
NOTE: Some settings with data entry use bytes as units of data volume. Each
character that you enter is one byte.
1. Click [Properties] on the Main Panel on the home page.
2. Select an item from the collapsible menu on the Menu Panel. To select an item in
the [Security], [Port Settings], [Protocol Settings], or [Emulation Settings] folder,
click “+” on the left of the folder to open the item.
3. To change settings, use the drop-down list box, text boxes, and check boxes on
the page.
The default settings in the drop-down list box are indicated with an asterisk (*).
4. After changes have been made, click [Apply New Settings].
• To cancel any changes you have made, click [Restore Settings].
• To display the current machine settings, click [Refresh Status].
NOTE: Some settings will be available only after you restart CentreWare Internet
Services or after the machine is switched off and on.
Default User ID and Password
If the System Administrator mode is enabled in CentreWare Internet Services settings,
you will be prompted to enter the System Administrator user ID and password when