Xerox 604P18057 - Manual (Page 238)

11 Setups
238 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Incoming Internet Fax Output Destination
Sets the output tray for printing the received e-mail.
Fax Transfer from Address Book
Sets whether to restrict the forwarding of received e-mails as fax documents to an
address not registered in the Address Book. If [On] is selected, and you attempt to
forward a received e-mail to an address not registered in the Address Book, forwarding
will not be executed, and e-mail data will be discarded.
Fax Transfer - Add Sender Header
Sets whether to use the [Sender Header] feature when you forward a received e-mail
to remote machines as a fax document. If you select [On], remark (“RESEND” or
space), start time and date of transmission, sender name, destination name, Internet
Fax address of the machine, and quantity will be added at the top of each page of the
document.
Fax Transfer Maximum Data Size
Sets the maximum data size when you forward a received e-mail to remote machines
as a fax document. You can set the size within the range of 1 to 65535 KB by using the
scroll buttons or the numeric keypad. If [On] is selected, and you attempt to forward a
received e-mail with a larger data size than specified, forwarding will not be executed,
and e-mail data will be discarded.
E-mail/Internet Fax Settings
This screen allows you to configure or change machine settings for sending scanned
documents as e-mail attachments. For more information, refer to the following.
E-mail Defaults – page 239
Address Search (Directory Service) – page 239
Other Settings – page 220
1. Select [E-mail/Internet Fax
Settings] on the [System
Settings] screen.
NOTE: If Internet Fax is not
installed, [E-mail Settings] is
displayed instead of [E-mail/Internet
Fax Settings].
2. Select the required option.
3. Select [Close].