Technicolor - Thomson Wireless Business DSL Routers SpeedTouchTM620 - Manual (Page 209)

Chapter 12
SLA Monitoring.
E-DOC-CTC-20051017-0155 v1.0 199
Use the following command to modify the SLA traceroute parameters:
Starting the SLA
Traceroute
The SLA traceroute process has been configured now. You now need to start the
process, to do so, use the following command:
maxfail The max number of
consecutive timeouts allowed
before terminating a
traceroute request number{0-255}
bypassrt Enables bypassing of the
normal routing tables. disabled or enabled
dffield Enables setting of the don't
fragment flag in the IP headers
of the traceroute requests. disabled or enabled
dsfield The value to store in the
Differentiated Service Field in
the IP packet. number{0-255
=>:sla traceroute modify
test = route
[addr] = 11.0.0.138
[size] = 0
[timeout] = 3
[probePerHop] = 3
[port] = 33434
[maxTtl] = 30
[initTtl] = 1
[createHopEntries] = disabled
[frequency] = 0
[maxrow] = 50
[storagetype] = nonVolatile
[trap] =
[type] = UdpEcho
[descr] =
[srcaddr] = 0.0.0.0
[intf] = none
[maxfail] = 5
[bypassrt] = disabled
[dffield] = disabled
[dsfield] = 0
:sla traceroute modify test=route
=>
Parameter Description Values
=>:sla traceroute start test=route
=>