Technicolor - Thomson Wireless Business DSL Routers SpeedTouchTM620 - Manual (Page 135)

Chapter 9
The Integrated SpeedTouch™ ISDN Modem
E-DOC-CTC-20051017-0155 v1.0 125
9.4.1 How to Configure the ISDN Dial-In Connection
Via the Web Interface Proceed as follows to configure the ISDN dial-in connection via the Web interface:
Step Action
1 Go to Expert mode
2 Click Connections
3 Click Routed PPoI
Result: on the page that appears, you see a predefined connection called
ISDN backup.
4 Click on the arrow to open the configuration pages for this connection.
Result: the Parameters page appears:
5 Fill in the username and password for the connection, as well as the dial-
in number. Also select the link type. Click Apply.
6 Click Routing.
Result: the Routing page appears:.
7 If necessary, fill in the destination and a label. Click Apply.