Technicolor - Thomson Wireless Business DSL Routers SpeedTouchTM620 - Manual (Page 191)

Chapter 11
SpeedTouch™ Advanced Diagnostics
E-DOC-CTC-20051017-0155 v1.0 181
11.3.2 Lower Layer Diagnostics
ADSL The :adsl info displays ADSL statistics and information on current
SpeedTouch™ DSL line status.
Although it is the same command for both SpeedTouch™ ADSL/POTS and ADSL/
ISDN variants, the command features specific output parameters and counters per
variant. ADSL reporting has been extended to report the unrestricted ADSL
bandwidth, i.e. the bandwidth the line would have if the DSLAM would not be
configured to limit ADSL bandwidth.
The partial example below shows ADSL diagnostics for an ADSL/ISDN variant:
=>:adsl info
Modemstate : up
Operation Mode : G.992.1 Annex B
Channel Mode : fast
Number of resets : 1
Vendor Local Remote
Country : 0f 00
Vendor : TMMB
VendorSpecific : 0000 0000
StandardRevisionNr : 00 00
Downstream Upstream
Margin [dB] : 9.0 6.0
Attenuation [dB] : 1.0 0.0
OutputPower [dBm] : 7.0 8.5
Available Bandwidth Cells/s Kbit/s
Downstream : 18867 8000
Upstream : 1886 800
Transfer statistics
Errors
Received FEC : 0
Received CRC : 0
Received HEC : 0
Transmitted FEC : 0
Transmitted CRC : 0
Transmitted HEC : 0
Near end failures since reset
Loss of frame: 0 failures
Loss of signal: 0 failures
Loss of power: 0 failures
Errored seconds: 0 seconds
Near end failures last 15 minutes
Loss of frame: 0 seconds
Loss of signal: 0 seconds
Loss of power: 0 seconds
Errored seconds: 0 seconds
Near end failures current day
Errored seconds: 0 seconds
Near end failures previous day
Errored seconds: 0 seconds
=>