Technicolor - Thomson Wireless Business DSL Routers SpeedTouchTM620 - Manual (Page 168)

Chapter 10
SpeedTouch™ Monitoring
E-DOC-CTC-20051017-0155 v1.0 158
10.2.12 How to Configure the Traps
Procedure In order to configure which traps are sent where, you need to:
If you simply want all tags to be sent, steps 2, 3 and 4 are not necessary.
How to Set the
Message Handling
Parameters
Use the :snmp targetparams add command.
Example:
How to Create a Notify
Filter
Use the :snmp notifyfilter add command.
Example:
How to Create a Notify
Profile Using that Filter
Use the :snmp notifyprofile add command.
Example:
How to Create
NotifyTags
Use the :snmp notify add command.
Example:
Step Action
1 Set the message handling parameters
2 Create a notify filter
3 Create a notify profile using that filter
4 Create notify tags
5 Create a destination for the traps
6 Enable traps
:snmp targetparams add paramname=Trap_params mpmodel=v1
securitymodel=snmpv1 securityname=RWCommunity
securitylevel=noAuthNoPriv
:snmp notifyfilter add profilename=Trap_profile subtree=iso
:snmp notifyprofile add paramname=Trap_params profilename=Trap_profile
:snmp notify add name=trap_notify_test tag=Trap_tag