Technicolor - Thomson Wireless Business DSL Routers SpeedTouchTM620 - Manual (Page 152)

Chapter 10
SpeedTouch™ Monitoring
E-DOC-CTC-20051017-0155 v1.0 142
10.2.3 How to View the System Contact, Name and
Location
Command Use the following CLI command to view the default configuration:
Default Configuration The default configuration is as follows:
{Administrator}[snmp]=>config
SNMP System Contact : Service Provider
SNMP System Name : SpeedTouch 620
SNMP System Location : Customer Premises
All SNMP traps : DISABLED