Technicolor - Thomson Wireless Business DSL Routers SpeedTouchTM620 - Manual (Page 151)

Chapter 10
SpeedTouch™ Monitoring
E-DOC-CTC-20051017-0155 v1.0 141
10.2.2 How to View the SNMP Configuration
About the SNMP
Service
The SpeedTouch™ SNMP service controls all SNMP traffic from and towards the
SpeedTouch™. By default, no restrictions apply regarding SNMP traffic from and
towards the local network. However SNMP traffic from and towards the WAN will
be blocked.
Command Use the following command to view the SNMP configuration:
This returns the following output:
You can the same command to view the SNMPV3 Traps:
:service system list name SNMPV3_AGENT expand enabled
Description................ Rx snmp GET, SET and GETNEXT PDUs
Properties................. server
Attributes................. state port aclip aclif aclifgroup map log
User Managed Attributes.... state aclip aclif aclifgroup map log
Attribute Values :
State...................... (administratively) disabled
Port....................... 161
Ip Access List............. any
Interface Access List...... any
Interface Group Access List any
Map List................... 161
Logging.................... disabled
:service system list name=SNMPV3_TRAPS expand=enabled