1 how to allow access to the snmp agent, Default setting, Command – Technicolor - Thomson Wireless Business DSL Routers SpeedTouchTM620 User Manual
Page 150: How to allow access to the snmp agent
Chapter 10
SpeedTouch™ Monitoring
E-DOC-CTC-20051017-0155 v1.0
140
10.2.1 How to Allow Access to the SNMP Agent
Default Setting
By default, access to the SNMP Agent is disabled. Before you are able to use SNMP,
you must enable it.
Command
Use the following command to allow access to the SNMP Agent:
:service system modify name=SNMPV3_AGENT state=enabled