Technicolor - Thomson Wireless Business DSL Routers SpeedTouchTM620 - Manual (Page 176)

Chapter 10
SpeedTouch™ Monitoring
E-DOC-CTC-20051017-0155 v1.0 166
10.3.3 Syslog via the CLI
The Syslog CLI
command group
The SpeedTouch™ CLI syslog command group basically provides the same possi-
bilities as provided on the SpeedTouch™ syslog web page:
To display a listing of all generated syslog messages, use following CLI command:
For more information on the syntax and use of the CLI syslog command group
commands, see “SpeedTouch™ CLI Reference Guide”.
=>:syslog help
Following commands are available:
config : Set/Display configuration
ruleadd : Add a new rule to the syslog configuration.
ruledelete : Delete a rule in the syslog configuration
flush : Flushes syslog rules.
list : List the current syslog configuration
Following command groups are available :
msgbuf
=>:syslog msgbuf help
Following commands are available :
show : Show messages in the syslog message buffer.
send : Send messages to remote syslog server.
flush : Flush all messages in syslog message buffer.
=>
=>:syslog msgbuf show
<173> May 20 17:52:47 xDSL linestate up (downstream: 8000 kbit/s,
upstream: 800 kbit/s; output Power Down: 7.0 dBm, Up: 8.5 dBm; line
Attenuation Down: 0.0 dB, Up: 0.0 dB; snr Margin Down: 9.0 dB, Up: 6.0
dB)
<38> May 20 17:52:50 PPP PAP Authenticate Request sent
<38> May 20 17:52:50 PPP PAP Authenticate Ack received
<132> May 20 17:52:50 PPP link up (Internet) [101.101.101.16]
<143> May 20 17:52:50 GRP Default destination is routed via gateway
101.101.101.16
<37> May 20 18:07:53 LOGIN User Administrator logged in on CONSOLE
=>