9 how to allow remote snmp, About remote snmp, Command – Technicolor - Thomson Wireless Business DSL Routers SpeedTouchTM620 User Manual
Page 161: Receiving traps, How to allow remote snmp, Chapter 10
Chapter 10
SpeedTouch™ Monitoring
E-DOC-CTC-20051017-0155 v1.0
151
10.2.9 How to Allow Remote SNMP
About Remote SNMP
It is possible to allow to allow a remote SNMP manager to monitor the
SpeedTouch™. To do this, add the WAN interface to the service access list.
Command
Use the following command:
Receiving Traps
To allow the remote SNMP manager to receive SNMP traps generated by the
SpeedTouch™, no extra configuration is necessary. It is, however, possible to
configure which traps are sent to a manager. For more information, refer to
“10.2.12 How to Configure the Traps” on page 158
.
You can also configure authentication for remote access to SNMP. For more
information, refer to
“10.2.11 How to Restrict SNMP Access” on page 157
=>service system ifadd name SNMPV3_AGENT group wan