Ricoh FAX4500L - Manual (Page 89)

3. Yes
4. Erase the number: No .
After erasing a number, you may store a new one to replace it if you wish. If
you do not wish to store a new number, press
No again. Then go to step 2
to continue or press Function if you have finished.
4-2. Programming Speed Dial
Programming a New Speed Dial
1. Function 3 2
Note: At this time, you can print a
Speed Dial List if you press
→
Start .
2. Input the Speed Dial Code that you wish
to program (from 00 to 99).
Example: 0 0
Press No if you input the wrong code.
3. Yes
4. Enter the telephone number at the op -
eration panel’s ten key pad.
If your machine is behind a PBX, include the access code and a pause before the telephone
number.
For an international number, place a pause after the country code. To input a pause, press the
Pause key.
QUICK DIAL YES OR CLR
.
NO
01
2125551234
_
QUICK DIAL ENTER FAX NUMBER
01 NO TO CANCEL
_
SPEED DIAL ENTER SPEED CODE
PRINT LIST
NO TO CANCEL
_
SPEED DIAL YES OR NO
00
SPEED DIAL ENTER FAX NUMBER
00 NO TO CANCEL
_
SPEED DIAL YES OR CLR
.
NO
00
01144715551234
_
SECTION 4. PROGRAMMING THE MACHINE
79