Ricoh FAX4500L User Manual

Page 23

LOCATION

For the best possible performance, install your machine in a place which satisfies
the following conditions.
❐ Not exposed to direct sunlight
❐ Well ventilated (air turnover at least three times per hour)
❐ Level
❐ Not subject to vibration
❐ Away from other electronic equipment, to

avoid interference

❐ Away from areas containing corrosive

gas

❐ Dust-free
❐ Condensation-free
❐ Temperature 63 to 82

❐ Humidity 40 to 70% RH (do not install

near a humidifier)

❐ Away from heaters and air conditioners,

to avoid sudden changes of temperature

❐ Within 5 yards of a three-pin grounded

power outlet (115 Volts, 60 Hz)

❐ With the clearance as shown on the right

IMPORTANT POINTS ABOUT POWER CONNECTION
❐ The supply from the wall outlet must not fluctuate by more than 20V either side

of 115 Vac.

❐ The power cord should not be laid in a place where it might trip somebody.
❐ Do not lay anything on the power cord.
❐ If you have to use an extension cord, make sure that it is capable of carrying

125V/15A, and that your facsimile terminal is the only piece of equipment con -
nected to that cord.

NOTE: This machine generates a certain amount of ozone. Although the

amount generated is within safety requirements, it is recommended
that, to avoid ozone buildup, you install the machine in a room which
can be air-conditioned or well ventilated.

GENERAL PRECAUTIONS