Ricoh FAX4500L User Manual

Page 82

2-2. User Parameter Settings

1. Function 6 0 2 2 2 2

9 1

Note:

At this time, you can print a User Parameter List if you
press

→

Start .

2. The current settings for switch 00 are now displayed on the bottom line of the

display (the top line shows the settings normally seen in a machine just deliv -
ered from the factory). If the settings for this switch are the way that you want
them, go to step 4.

3. To change the required setting, press a

number from 0 to 7 corresponding to the
digit that you wish to change.
Example: 0 . The value of the digit
changes, in this case from 0 to 1.

Each switch contains 8 digits, which act as on/off switches for various features. The digits are
numbered from 7 to 0, with 7 at the left and 0 at the right.

4. Either:

❐ Scroll through the switches with

↑

and

↓

until the required switch ap -

pears. Then go to step 3.

❐ Finish: Yes Function

The user parameter switches are explained on the following pages.

USER PARAMETER PRINT LIST

DEFAULT:

00000000

SWITCH00:

00000000

YES

TO END

USER PARAMETER PRINT LIST

DEFAULT:

00000000

SWITCH00:

00000001

YES

TO END

SECTION 4. PROGRAMMING THE MACHINE