Ricoh FAX4500L User Manual
Page 83
Switch 00 - Home position settings
Digit
Purpose
0
Marker
0: Off
1: On (successfully scanned documents will be marked)
1
2
Contrast
Bit 2 Bit 1 Setting
Bit 2 Bit 1 Setting
0 0 Normal
1 0 Darken
0 1 Lighten
1 1 Darken
3
4
Resolution
Bit 4 Bit 3 Setting
Bit 4 Bit 3 Setting
0 0 Standard
1 0 Fine
0 1 Detail
1 1 Fine
5
Transmission mode
0: Memory transmission
1: Immediate transmission
6
If you change any of the contrast, resolution, transmission mode, marker, or halftone
settings before making a transmission, then:
0: The setting(s) will not return to the home position after the transmission.
1: The setting(s) will return to the home position after the transmission.
7
Halftone
0: Off
1: On
Switch 01 - Printing of various items on received messages
Digit
Purpose
0
Mark to distinguish messages that were sent to your machine through a forwarding
station (Memory card or hard disk required)
0: Off
1: On
1
Center mark
0: Off
1: On
2
Reception time
0: Off
1: On
3
Do not change this setting.
4
Checkered mark
0: Off
1: On
5
Printing of the Command Information Line (ISDN kit required)
0: Off
1: On
This has the same effect as the TTI On/Off setting.
6, 7
Do not change these settings
Switch 02 - Automatic printing of reports
Digit
Purpose
0
Transmission result report (memory transmission)
0: Off
1: On
1
Do not change this setting.
2
Memory storage report
0: Off
1: On
3
Polling reserve report
0: Off
1: On
4
Polling result report (polling reception)
0: Off
1: On
5
Transmission result report (immediate transmission)
0: Off
1: On
6
Polling clear report
0: Off
1: On
7
TCR
0: Off
1: On
Forwarding mark:
SECTION 4. PROGRAMMING THE MACHINE
73