Ricoh FAX4500L - Manual (Page 60)

❐ If you wish to view another forward -
ing station number: Yes .
Go to step 2.
❐ Finish: Function
5.
↓
until the RTI/CSI that you wish to
delete appears.
To delete the RTI/CSI: Clear , then
go to step 4.
❐ It is not possible to edit an RTI/CSI; if you wish to do so, you must delete
the incorrect label and store a new one.
CAUTION: If you delete all the RTIs and CSIs for a forwarding station, you
must also delete the forwarding station. If you do not do this, all
incoming messages will be forwarded to that station.
6. Type in an RTI or CSI, then
press Yes .
7. Either:
❐ Store this RTI as a wild card: Yes
❐ Otherwise: No
8. Either
❐ Input another RTI/CSI for this forwarding station: go to step 6.
❐ Finish working on this forwarding station: No . Go to step 4.
❐ Finish: Function
FORWARDING SET FORWARD CODE
No. PRINT LIST
NO TO CANCEL
_
FORWARDING SELECT
No. 02 DEST. 0
1. RTI PROG 2. RTI
YES TO END
_
FORWARDING
STORE AS WILD CARD? YES
.
NO
XYZ. CO.
Inputting labels: see page 2.
SECTION 3. ADVANCED FEATURES
50