Palm PDA CentroTM Smart Device - Manual (Page 76)

Y O U R P H O N E
U S I N G A H A N D S - F R E E D E V I C E 76
4
CH
AP
T
E
R
8 (Optional) Enable advanced hands-free
features by pressing the multifunction
button (MFB) on the hands-free device.
You can tell that the connection is
successful when you see a light-blue
headset icon in the title bar of the Phone
application. You can now use your Centro
with the Bluetooth hands-free device.
Using a Bluetooth hands-free device
After you create a partnership with your
Bluetooth hands-free device and you turn it
on within range (up to 30 feet), the Centro
automatically routes all calls to the
hands-free device instead of to the
earpiece on your Centro. When a call
comes in, your Centro rings and the
hands-free device beeps. Even if you
answer the call on your Centro, the call
goes to the hands-free device. If you prefer
to route calls to the earpiece on your
Centro, you can change the settings on
your Centro to do this; see Customizing
advanced settings for your hands-free
device for details.
The features of your hands-free device vary
by model. Check the documentation for
your hands-free device for details about
these features. Your Centro can support
the following actions, provided that your
hands-free device also supports them:
• Dial a call
• Answer an incoming call
• Hang up a call and answer a call-waiting
call
• Place a call on hold and answer a
call-waiting call
•
Hang up a single call
•
Transfer an outgoing call from the
earpiece on your Centro to the
hands-free device
• Ignore an incoming call
TIP If you’re using a Bluetooth hands-free
device and you want to return to the earpiece
or a wired headset during a call, select Cancel
Bluetooth in Active Call View. To return the
call to the hands-free device, open the
Options menu and select Connect
Bluetooth.