Palm PDA CentroTM Smart Device - Manual (Page 165)

Y O U R C O N N E C T I O N S T O T H E W E B A N D W I R E L E S S D E V I C E S
C O N N E C T I N G W I T H B L U E T O O T H D E V I C E S 165
7
CH
AP
T
E
R
6 Select Add Device. The Discovery icon
appears, indicating that the discovery
process is active.
7 Select the Show pick list and select
Nearby devices.
8 If the device you want to add doesn’t
appear on the Discovery Results list,
make sure that the other device is ready
to receive a connection request (see the
device’s documentation), and then
select Find More on your Centro to
search again.
9 Enter the same passkey on your Centro
and on the Bluetooth device, and select
OK.
IMPORTANT Some Bluetooth devices
have a predefined passkey. If your device
has a predefined passkey, you can find it in
the documentation for that device. Other
devices provide a screen where you enter
a passkey that you make up. In either case,
you must use the same passkey on both
your Centro and the other Bluetooth
device. We recommend that, where
possible, you make up a passkey of 16
alphanumeric characters (letters and
numerals only) to improve the security of
your Centro. The longer the passkey, the
more difficult it is for the passkey to be
deciphered.
10 Select Done.
Accepting a connection from another
Bluetooth device
TIP For the Centro to be visible to Bluetooth
devices, the Bluetooth setting must be set to
On and visibility must be set to Visible or
Temporary.