Palm PDA CentroTM Smart Device User Manual
Page 290
I M P O R T A N T S A F E T Y A N D L E G A L I N F O R M A T I O N
290
•
ETSI EN 301 489-1/-7/-17/-24
•
EN60950-1
•
EN 50360
We hereby declare that the above named product is in conformance
to all essential requirements of the RTTE Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and
detailed in Annex IV of directive 1999/5/EC has been related to
Articles:
•
R&TTE Article 3.1 (a) Health and Safety
•
R&TTE Article 3.1 (b) EMC
•
R&TTE Article 3.2 Spectrum Usage
Identification mark:
0984 (Notified Body) CE.
This identification mark is permanently provided on the device label.
The technical documentation relevant to the above equipment will be
held at:
Palm Inc.
950 W Maude Avenue
Sunnyvale, CA. 94085
U.S.A.
Person responsible for making this declaration:
David Woo/Sr Compliance Engineer
Sunnyvale/August 31, 2006
Bluetooth
®
Qualification Program
Information about this listing can be found at:
Bluetooth
®
QD ID:
B013349
Static Electricity, ESD, and Your Palm
®
Device
Electrostatic discharge (ESD) can cause damage to electronic devices
if discharged into the device, so you should take steps to avoid such
an occurrence.
Description of ESD Static electricity is an electrical charge caused
by the buildup of excess electrons on the surface of a material. To
most people, static electricity and ESD are nothing more than
annoyances. For example, after walking over a carpet while scuffing
your feet, building up electrons on your body, you may get a shock—
the discharge event—when you touch a metal doorknob. This little
shock discharges the built-up static electricity.
ESD-susceptible equipment
Even a small amount of ESD can
harm circuitry, so when working with electronic devices, take
measures to help protect your electronic devices, including your
Palm
®
device, from ESD harm. While Palm has built protections
against ESD into its products, ESD unfortunately exists and, unless
neutralized, could build up to levels that could harm your equipment.
Any electronic device that contains an external entry point for
plugging in anything from cables to docking stations is susceptible to
entry of ESD. Devices that you carry with you, such as your Palm
device, build up ESD in a unique way because the static electricity
that may have built up on your body is automatically passed to the
device. Then, when the device is connected to another device such
as a docking station, a discharge event can occur.
Precautions against ESD
Make sure to discharge any built-up
static electricity from yourself and your electronic devices before
touching an electronic device or connecting one device to another.
The recommendation from Palm is that you take this precaution
before connecting your Palm device to your computer, placing a
device in a cradle, or connecting it to any other device. You can do
this in many ways, including the following:
•
Ground yourself when you’re holding your device by
simultaneously touching a metal surface that is at earth ground.
For example, if your computer has a metal case and is plugged
into a standard three-prong grounded outlet, touching the case
should discharge the ESD on your body.
•
Increase the relative humidity of your environment.
•
Install ESD-specific prevention items, such as grounding mats.