Palm PDA CentroTM Smart Device - Manual (Page 222)

Y O U R A P P L I C A T I O N A N D I N F O M A N A G E M E N T T O O L S
B E A M I N G I N F O R M A T I O N 222
11
CH
AP
T
E
R
Beaming an application
Not all applications can be beamed. A lock
icon appears on the Beam screen next
to applications that cannot be beamed.
1 Press Applications .
2 Press Menu .
3 Select Beam from the App menu.
4 Select the Beam From pick list and
select the location of the application you
want to beam: Phone or .
5 Select the application you want to
transfer.
6 Select Beam.
7 When the Beam Status dialog box
appears, point the IR port on your
Centro directly at the IR port of the
receiving device.
8 Wait for the Beam Status dialog box to
indicate that the transfer is complete
before you continue using your Centro.
Receiving beamed information
BEFORE YOU BEGIN Make sure that the
Beam Receive option in Power
Preferences is set to On. See Optimizing
power settings for details.
1 Turn on your screen.
2 Select the beam command on the
transmitting device.
3 Point the IR port on your Centro directly
at the IR port of the transmitting device
to open the Beam Status dialog box.
4 When the Beam Status dialog box
appears, select a category for the entry.
5 Select Yes to receive the information or
No to refuse it.