Palm PDA CentroTM Smart Device User Manual

Page 262

C O M M O N Q U E S T I O N S

R E P L A C I N G T H E B A T T E R Y

262

battery that is recommended or sold by
Palm and is compatible with the Centro.

CAUTION

Failure to use the proper battery

may result in a risk of personal injury or
product damage, and it voids your Centro
warranty.

1 Press Power/End

to turn off the

screen.

2 Press the Battery door near the top

where the door and camera sections
meet and slide it downward to remove
it from your Centro.

3 Place a finger in the notch next to the

battery, and lift up the old battery at a
45-degree angle to remove it from the
compartment.

4 Align the metal contacts on the new

battery with the contacts inside the
battery compartment, insert the new
battery into the compartment at a
45-degree angle, and then press it into
place.

IMPORTANT

Use the battery that came

with your Centro. Do not use a battery
from another Centro model in your Centro.
Similarly, do not use the Centro battery in
another Centro model. Using a battery that
is designed for another Centro model can
damage your Centro.

5 Slide the battery door onto the back of

the Centro until it clicks into place.

Battery door

Battery contacts

Centro
contacts