Parker Hannifin Dynaserv G2 - Manual (Page 4)

-3-
! This product has been marked with and signs so that it can be used safely. Ignoring precautions and
prohibitions related to these signs and using this product in an incorrect way may cause danger to the life and body
of the operator. Always follow the precautions and observe the prohibitions explained below.
! Please make sure to understand the information given below completely before you start reading the technical
manual.
! Please keep the technical manual and this sheet handy while using the product. In addition, make sure that they are
handed out to the operator of the product.
Precautions
! Make sure to read the technical manual before using the device.
Operational mistakes and faulty wiring may result in damages and failure of the device.
! Make sure to check the wiring once more before turning the power on.
Faulty wiring may result in fire, electric shock, or damage of the device.
! Confirm that the proper combination of motor and driver parts is used. Using the device with an incorrect
configuration may result in failure. (Be sure to confirm the model--MODEL--on the rating nameplates.)
! Make sure the conditions of temperature, humidity, dust, etc. are as specified for the installation and storage
environments.
! Do not block the air vent of the device. Keep the specified open space around the device as well. Poor ventilation
may cause overheating, leading to failure.
! Some of the motor parts are very heavy; please pay sufficient attention to this when carrying and installing the
parts. If the weight is more than 10kg (22.04 lbs), carrying or lifting tools should be used as much as possible.
! Both the motor and driver parts should be installed in the specified orientation.
! Keep the protection cover (transparent plastic plate) attached on the power supply terminal part of the driver. It is
provided to prevent inadvertent electric shock accidents.
! !! !
Precautions ! !! !
! !! !