Parker Hannifin Dynaserv G2 - Manual (Page 27)

3-3
3.2 Cable Specification List
Cable name Electric cable size Driver Current (A)
1)
AC power supply
cable
2.0 mm 2 or more, 30 m or less in length TB1
*
2)
Ground cable (power
supply)
2.0 mm 2 or more TB1
*
3) Motor cable 2.0 mm 2 or more, 30 m or less in length TB1 *
4) Sensor brake cable 0.3 to 0.75 mm 2 TB2
5)
RS232C
communication cable
Dedicated cable is required. CN1
6)
Encoder resolver
cable 0.2mm 2 twisted pair, batch shielded cable, outer
diameter φ 14 mm or less, 10 m or less in length
CN2
Maximum
100 mA DC
7) Jumper cable 2.0 mm 2 or more TB1
*
8) Analog monitor card
Dedicated cable is required. [R7033YB] (cable
with connector)
CN3
9) Controller cable
0.2 to 0.5mm 2 , batch shielded cable, outer
diameter φ 9 mm or less, 3 m or less in length
CN4
Maximum
500 mA DC
* 20A for the A ( φ 264mm) and E (φ 205mm) types for both the DM and DR series
15A for the B ( φ 160mm) type, and 10A for the DM1004B/1004C motors
3