LOREX Technology NETWORK READY H.264 HIGH PERFORMANCE DIGITAL VIDEO SURVEILLANCE RECORDER LH300 Series - Manual (Page 71)

57
Setting up Local and Remote Viewing
Connecting to your system
Once you have your system’s IP and HTTP Port number, you can view your system locally through
the same local network.
To view your system locally:
1. Open Internet Explorer or Safari (Mac users)
2. Enter http://, then your system’s IP address, followed by a semi-colon, followed by the
HTTP port number. For example, enter http://192.168.11.89:80 into the web browser.
3. Enter the system’s login and password information, and then click Login.
NOTE: This method only works for LOCAL VIEWING ONLY. If you wish to access your system
from a remote location, you must setup Easy Connect, or enable DDNS.
Connecting to your system on Internet Explorer (PC):
1. Open Internet Explorer.
2. In the address bar, enter the IP address of your system. (Press the Enter button on the
remote twice to open the system information window.
3. In the ID and password fields, enter your LAN user ID and password and click LOGIN. If you
enter an incorrect user ID or password the login page will refresh and the text fields will
clear.
Example
Enter the local IP
address or the
DDNS address of
the DVR.
Figure 24.3 Entering the DVR’s IP address into the address bar.
Figure 24.4 Login screen.