Select the channel you want to have re-assigned, Click and hold the mouse, Figure 4.7 the channel menu – LOREX Technology NETWORK READY H.264 HIGH PERFORMANCE DIGITAL VIDEO SURVEILLANCE RECORDER LH300 Series User Manual
Page 30: Flexible camera assignment
16
Starting the System
Flexible Camera Assignment
You can re-assign camera channels to different positions. For example, you can duplicate the
video feed from channel 1 onto channel 2.This is useful if you wish to re-arrange the position of
each channel.
NOTE: This feature is avaliable on 8/16 channel systems only.
NOTE: The system continues to record the designated channel even if you re-assign camera
positions.
To re-assign camera positions:
1. Select the channel you want to have re-assigned.
2. Click and hold the mouse.
• A channel menu appears.
3. While holding left-click, move the mouse to the left or right to change the channel number.
4. Release left-click on the mouse to assign the new channel.
EXAMPLE
Channel 3 is re-assigned to channel 5.
Figure 4.6 Re-assigning camera positions.
Figure 4.7 The channel menu.