LOREX Technology NETWORK READY H.264 HIGH PERFORMANCE DIGITAL VIDEO SURVEILLANCE RECORDER LH300 Series - Manual (Page 24)

10
Getting Started
Remote Control
The remote control is the secondary input device
for navigating the system’s graphical user
interface.
To use the remote control:
1. LIST : Open the Event List menu.
2. OSD : Show/hide the on-screen display.
3. Primary controls:
• MENU : Opens the system main menu.
• : Press to open the Split-Screen Selection
menu ( 8 / 16-channel only).
From full-screen single channel view, changes
display view to Quad split-screen (
4-channel
model only)
• S/ CH+ : Move cursor in menus up; Channel Up.
• X/ FWD : Move cursor in menus right; during
playback, increase forward playback speed (5X,
15X, 60X).
• W/ REW : Move cursor in menus left; during
playback, increase reverse playback speed (5X,
15X, 60X)
• / : Start/pause forward playback.
• T/ CH- : Move cursor in menus down; Channel
down.
• ESC : Go back / exit menus.
• : Confirm menu selections.
4. : While in Event List menu, press to delete a selected event (no confirm or undo).
5. : During Live Mode and Playback, Press to take a screenshot of the main display—USB
flash drive must be connected
(8/16-channel only).
6. Increase/Decrease buttons:
• : Increase the value of selected menu option.
• : Decrease the value of selected menu option.
Figure 3.0 Remote Control