Drag cursor on screen to pan/tilt the camera, Pan, tilt, zoom the camera to the desired position, Click the set button – LOREX Technology NETWORK READY H.264 HIGH PERFORMANCE DIGITAL VIDEO SURVEILLANCE RECORDER LH300 Series User Manual

Page 112: Click on the desired preset button, Click the clear button, Click on the desired preset you wish to delete, Configuring ptz pre-sets

Appendix B: Connecting Motion / Alarm Devices

NOTE: You can also drag the cursor on the screen during full screen mode, to pan and tilt the
camera.

Configuring PTZ Pre-sets

Saving a preset:

1. Pan, tilt, zoom the camera to the desired position.
2. Click the SET button.
3. Click on the desired Preset buttons (1~50) to save the preset.

Opening a preset:

1. Click on the desired preset button.

• The camera automatically pans to the saved preset location.

Deleting a preset:

1. Click the CLEAR button.
2. Click on the desired preset you wish to delete.

Drag cursor on screen to pan/tilt the camera