Use the mouse buttons to perform the following, System passwords mouse control, System passwords – LOREX Technology NETWORK READY H.264 HIGH PERFORMANCE DIGITAL VIDEO SURVEILLANCE RECORDER LH300 Series User Manual
Page 23: Mouse control

9
Getting Started
System Passwords
Depending on your system model, the default user name (ID) and password is different. Refer to
the tables below for details on the default system user IDs and passwords.
Mouse Control
The mouse is the primary input device for navigating system menus.
NOTE:
Unless otherwise noted, all system functions described in this manual are achieved through
mouse input.
To use a mouse with the system:
1. Connect a USB mouse to the USB port on rear panel of the system.
2. Use the mouse buttons to perform the following:
• Left-Button: Click to select a menu option; while in
Split-Screen mode (Live View or Playback), click on a channel
to view the selected channel in full-screen.
• Right-Button: Click to return to previous menu; exit menus/
modes.
3. Scroll-Wheel: Scroll up/down to change values in selected
menu options; position markers in playback bar.
LEVEL
ID
PASSWORD
USER
1
1111
ADMIN
2
2222
LEVEL
ID
PASSWORD
USER
2
2222
ADMIN
3
3333
LEVEL
ID
PASSWORD
GUEST
7
1111
USER
8
2222
ADMIN
9
3333
8 & 16 Channel
4/ 8/ 16 Channel
4 Channel
Local DVR Access
Remote/LAN Viewing
Figure 2.0 Connect a USB mouse to the USB port on the rear panel
Tip!
Connect the mouse to the
USB port on the rear panel
to allow for easy access of
a USB backup device using
the front panel.
1
2
3
Figure 2.1 Mouse button operation