Sharp AR-M355N - Manual (Page 89)

NORMAL COPYING
4-10
Automatic two-sided copying using the automatic
document feeder
When the optional duplex module is installed, the following automatic two-sided copying can be performed. The
paper is automatically turned over during copying, allowing two-sided copies to be made with ease.
1. Automatic two-sided copying from one-sided
originals
2. Automatic two-sided copying from two-sided
originals
3. Automatic one-sided copying from two-sided
originals
1 Place the originals in the document feeder
tray. (pages 4-3 to 4-6)
2 Touch the [2-SIDED COPY] key.
3 Select the desired copy mode.
The display will vary
depending on the
equipment installed.
When making automatic two-sided copies of a
one-sided 11" x 17" (A3) or 8-1/2" x 14" (B4) size
portrait original, or when you wish to invert the top
and bottom of the back side of a two-sided original,
touch the [BINDING CHANGE] key.
4 Touch the [OK] key.
Perform steps 6 through 10 on pages 4-7 and 4-8.
Original Copy
SPECIAL MODES
2-SIDED COPY
OUTPUT
If a copy key is touched for a mode that cannot
be selected, a double beep will sound.
DED COPY
BIND
CHA
Example of a
portrait-oriented
original Example of a
landscape-oriented
original
OK
0
BINDING