Sharp AR-M355N - Manual (Page 199)

SELECTING PRINTING FUNCTIONS Settings in the [Main] tab (continued)
2-5
(7) [Punch]
Use this to select the punch function.
When the punch function is selected, [Collate] is
automatically selected.
Default setting: Not selected
Punch function (only when a punch module is
installed)
When a punch module is installed on the saddle
stitch finisher, holes can be punched in the printed
pages before delivery to the tray. (The punch
function cannot be used in combination with the
pamphlet function.) When using the punch
function, the automatic image rotation function
does not operate.
Paper sizes that can be punched are indicated in
the specifications on page 3-15 of the "Operation
manual (for general information and copier
operation)".
(8) [No Offset]
Select this when you do not wish sets of collated or
grouped pages to be offset from each other.
Default setting: Not selected
Offset function
Each set of printed pages is offset from the
previous set in the offset tray for easy separation.
(The offset function operates in the finisher or
saddle stitch finisher tray.) The offset function does
not operate when the staple sort function is
selected.
(7)
(8)
{Original 1} {Punch positions}
{Original 2} {Punch positions}
[Example]
Offset mode Non-offset mode