Sharp AR-M355N - Manual (Page 283)

0-4
TO USE THIS PRODUCT CORRECTLY AS
A FACSIMILE
Several points must be kept in mind when using this product as a facsimile.
Please note the following:
■ ■ ■ ■ Line connection
Use the telephone cable supplied to connect
the machine to a telephone line. Insert the end
of the line cord with the core into the LINE jack
on the machine as shown. Insert the other end
into the telephone line jack.
■ ■ ■ ■ Fax power switch
When using the machine, be sure to keep the fax power
switch turned on at all times. The fax power switch must be
turned on to receive faxes at night or send timer transmission
faxes at night.
■ ■ ■ ■ Setting the date and time and programming your sender's name and number
Before using the fax function, you must set the date and time and program your sender's name and number in
the machine. This procedure is explained in "POINTS TO CHECK AND PROGRAM AFTER INSTALLATION" on
page 1-2 of this manual.
■ ■ ■ ■ Lithium battery
A lithium battery inside the machine keeps key operator program settings for the fax function in memory.
● When the battery dies, key operator program settings will be lost. Be sure to keep a written record of the key
operator program settings.
● The life of the lithium battery is approximately 5 years if the machine power switch and fax power switch are
kept continually off.
● When the battery dies, please consult your dealer or your nearest Sharp customer assistance center. When
the lithium battery dies, a message will appear in the display and the unit will no longer function.
■ ■ ■ ■ Other information
● If a thunderstorm occurs, we recommend that you unplug the power cord from the power outlet. Information
will be retained in memory even if the power cord is unplugged.
Core
Line jack
ON
OFF
Fax power switch
Tiger2_00.fm 4 ページ ２００４年９月１６日 木曜日 午前１０時１分