Sharp AR-M355N - Manual (Page 298)

SELECTING RESOLUTION AND EXPOSURE SETTINGS
1-11
1
SELECTING THE EXPOSURE
The initial exposure setting is AUTO. To change the setting, follow these steps:
■ ■ ■ ■ Change the exposure.
1 Touch the [EXPOSURE] key.
2 Touch the desired exposure key.
To darken the exposure,
touch the
key. To
lighten the exposure,
touch the
key.
When the or
key is touched, [AUTO]
is not highlighted and
[MANUAL] is highlighted. To return to auto
exposure, touch [AUTO].
3 Touch the [OK] key.
You will return to the
initial screen.
■ ■ ■ ■ Exposure settings
AUTO
ORIGINAL
STANDARD
RESOLUTION
AUTO
EXPOSURE
AUTO MANUAL
MANUAL AUTO
OK
NOTES
● When using the document glass to scan pages an
original, the exposure setting can be changed
each time you change pages. When using the
automatic document feeder, the exposure setting
cannot be changed once scanning has begun.
● The default (initial) exposure setting can be
changed in "Default exposure settings" (page 8-5)
in the key operator programs.
1 to 2
Select this setting if your original consists
Originalmostly of dark characters.
Auto
This setting automatically adjusts the
exposure for light and dark parts of the
original.
4 to 5
Select this setting if your original consists
Originalmostly of faint characters.
Tiger2_fax_sec.book 11 ページ ２００４年９月１６日 木曜日 午前８時５３分