Sharp AR-M355N User Manual

Page 362

PROBLEMS AND SOLUTIONS

7-5

Printing does not take
place after reception.

Does a message appear in the
display instructing you to add
toner or paper? (Printing is not
possible.)

Restore printing capability
as instructed by the display
message. Printing will
begin.

A received image
prints out blank.

Was the wrong side of the original
scanned in the transmitting
machine?

Check with the operator of
the transmitting machine.

The received image
is faint.

Is the original faint?

Ask the other party to re-
send the document using a
suitable exposure setting.

The received image
is distorted.

Were line conditions poor due to
thunder or another reason?

Ask the other party to send
the document again.

White or black lines
appear in the
transmitted image.

Is the document glass dirty?

Clean the document glass .

Operation manual (for
general information and
copier operation), page
6-2.

A dial tone is not
heard through the
speaker.

Is the volume set to "low"?

Set the speaker volume to
"medium" or "high".

A ringing sound is not
made.

Has the ringer volume been turned
off?

Set the ringer volume to
"low", "medium", or "high".

Problem

Check

Solution

Page

Tiger2_fax_sec.book 5 ページ２００４年９月１６日　木曜日　午前８時５３分