Sharp AR-M355N - Manual (Page 224)

MAKING CONFIGURATION SETTING
4-4
Printer Default settings
The default settings are used to set specific print conditions for printing in an environment where the print driver is
not used (such as printing from MS-DOS or from a computer that does not have the provided print driver installed).
The following settings are available:
■ ■ ■ ■ Copies
COPIES sets the number of print to make.
Default setting: 1
The number of copies can be set from 1 to 999.
■ ■ ■ ■ Orientation
ORIENTATION allows portrait orientation or
landscape orientation to be selected for printing.
Default setting: PORTRAIT
PORTRAIT or LANDSCAPE can be set.
■ ■ ■ ■ Default paper size
The paper size to be used for printing under normal
conditions is set.
Printing will be performed on the specified size of
paper unless otherwise specified.
Default setting: 8-1/2 x 11 or A4
11X17, 8-1/2X14, 8-1/2X13, 8-1/2X11, 7-1/4X10-1/2,
5-1/2X8-1/2, A3, B4, A4, B5 or A5 can be set.
■ ■ ■ ■ Default output tray
The output tray to be used for printing under normal
conditions is set. Printed sheets will be output to
the specified tray unless otherwise specified by
application software.
Default setting: CENTER TRAY
The trays that can be selected depend on
installation of peripheral devices.
■ ■ ■ ■ Default paper type
The paper type to be used for printing under normal
conditions is set. Printing will be performed on the
specified type of paper unless otherwise specified.
Default setting: PLAIN
PLAIN, PRE-PRINTED, RECYCLED, LETTER
HEAD, PRE-PUNCHED or COLOR can be set.
■ ■ ■ ■ 2-SIDED PRINT
Printing mode, 1-SIDED or 2-SIDED, to be used for
printing in the normal condition is set.
Default setting: 1-SIDED
1-SIDED, 2-SIDED (BOOK) or 2-SIDED (TABLET)
can be set.
■ ■ ■ ■ Smoothing
SMOOTHING reduces jaggies seen at roundish
curved portions of characters and images to be
printed and improves pseudo resolution.
Default setting: Off
Smoothing on or off can be selected.
NOTE
When the printer driver is used for printing and the printer driver settings conflict with the printer default settings,
the printer driver settings take precedence. For items that can be set in the printer driver, perform the settings in
the printer driver.