Sharp AR-M355N - Manual (Page 197)

SELECTING PRINTING FUNCTIONS Settings in the [Main] tab (continued)
2-3
(4) N-Up Printing
Each page is reduced to allow multiple pages to be
printed on each sheet. The pages are printed in "Z"
order on each sheet.
The following five settings are available:
[1-Up], [2-Up], [4-Up], [6-Up], [8-Up], [9-Up],
[16-Up].
Example: 4-Up [Right, and Down]
Default setting: 1-Up
[Border]
This setting is grayed out when [1-Up] is selected.
Select whether or not to print a border around each
page when a setting other than 1-Up is selected.
Default setting: Not selected
[Order]
This setting is grayed out when 1-Up is selected.
When a setting other than 1-Up is selected, the
layout of the pages on the sheet can be selected.
Example: Changing the layout of 4-Up to [Left, and
Down].
(5) User Settings
The user can store up to 30 sets of settings,
allowing the settings to be easily changed by
simply selecting the desired set.
Default setting: Factory Defaults
[Save]
Save the settings under the name that appears in
"User Settings".
Up to 20 characters can be entered for the name. If
none of the settings have been changed (the
settings are still the factory defaults), this button will
be grayed out.
When [Delete] appears in the button, it can be
clicked to delete a stored set of user settings.
(5) (4)
Border