Key operator programs, Key operator program list, Operation settings – Sharp AR-M355N User Manual
Page 365: Fax settings, Fax default settings, Fax send settings, Fax receive settings, Fax polling security
8-2
KEY OPERATOR PROGRAMS
This chapter explains key operator programs that are related to the fax function. For key operator programs that are
related to general use of the machine, see the key operator programs manual.
KEY OPERATOR PROGRAM LIST
NOTE
You may not be able to use all of the programs in the key operator program list. Programs that you can use will
depend on what peripheral devices are installed on the machine.
Program name
Page
The number of direct address/sender keys
displayed setting
Must input next address key at broadcast
setting
The number of file name/subject keys
displayed setting (when the network
scanner option is installed)
Dial mode setting (Setting your line type)
Original print on transaction report
Remote reception number setting (only
when extension phone is connected)
Transaction report print select setting
Activity report print select setting
ECM (This setting is only effective if the other
machine is a G3 machine that supports ECM)
Disable of fax number direct entry
Auto reduction sending setting
Printing page number at receiver
Date/own number print position setting
Recall in case of communication error
Number of calls in auto reception
Duplex reception setting (only when the
duplex module option is installed)
Set the telephone number for data
forwarding
Tiger2_fax_sec.book 2 ページ 2004年9月16日 木曜日 午前8時53分