beautypg.com

Using the f-code relay broadcast, Function (your machine is the relay machine), Using the f-code relay request function – Sharp AR-M355N User Manual

Page 338: Your machine requests a relay broadcast), Is the relay machine), Requests a relay broadcast), Using the f-code relay broadcast function

background image

F-CODE RELAY BROADCAST TRANSMISSION

4-9

4

USING THE F-CODE RELAY BROADCAST FUNCTION

(your machine is the relay machine)

When a document is received from a relay request machine, the F-code relay broadcast function transmits the
document to the end receiving machines using a memory box only if the sub-address and passcode sent by the
relay request machine are correct.
Refer to pages 6-10 through 6-14 for the procedures for creating, editing, and deleting memory boxes.
Up to 30 end receiving machines (30 one-touch keys or group keys) can be programmed in the F-code relay
broadcast memory box.
A document received from a relay request machine is initially stored in the memory box of your machine. Your
machine (the relay machine) also prints the document, thus the document is first stored as a print job and then as
transmission jobs to each of the programmed end receiving machines. The document data is automatically cleared
after transmission to all end receiving machines is completed.

USING THE F-CODE RELAY REQUEST FUNCTION

(your machine requests a relay broadcast)

Ask the operator of the other F-Code machine (the relay machine) to create an F-Code relay broadcast memory
box that contains the end receiving machines to which you wish to send a fax, and ask for the sub-address (SUB)
and passcode (SID) of that box.
When you dial the relay machine to send the fax, enter the sub-address and passcode after the fax number. The
fax will be sent to the relay machine's memory box, and the relay machine will call each of the programmed end
receiving machines and relay the fax to those machines. (If a passcode (SID) is not programmed in the memory
box , enter only the password when dialing.)
Aside from the method of dialing the relay machine, the transmission procedure is the same as for a
normal transmission (refer to chapter 2).
Refer to "ENTERING (DIALING) A FAX NUMBER WITH A SUB-ADDRESS AND PASSCODE
" on page 4-3 for
the procedure for entering a sub-address and passcode after the fax number of the other machine.

Tiger2_fax_sec.book 9 ページ 2004年9月16日 木曜日 午前8時53分